Ä¢¹½ÊÓƵ

Bioengineering

PhD in Biomedical Engineering

The Doctor of Philosophy in Biomedical Engineering at the University of Toledo is a joint program between The College of Engineering (COE) and The College of Medicine (COM). The degree is conferred based on high scholarly attainment in the field of biomedical engineering. This program incorporates a formal entrepreneurship component in collaboration with the College of Business Administration (COBA) to encourage PhD students to commercialize the biomedical technology they may develop as part of their dissertation research. The curriculum also provides a PhD program for MD students from undergraduate engineering backgrounds that are interested in pursuing a dual degree and careers as physician scientists.

The entrance requirement for the PhD program in Biomedical Engineering is the B.S. degree in engineering or in science fields such as biology, chemistry, physics, mathematics, or computer science. Students with non-engineering undergraduate degrees desiring entry into this PhD program must have completed 1 year of engineering physics; 1 year of biology; 1 year of general chemistry; 2 years of calculus through differential equations; and at least 12 semester credit hours of undergraduate engineering/science course work (appropriate to the area of research interest of the candidate) to be considered for admission. Credit received for undergraduate coursework required for admission will not be applied toward the graduate degree.

In addition to coursework requirements, continuation within the Ph.D. program requires that the student pass two major examinations: (1) the Ph.D. Qualifying Exam and (2) the defense of the Dissertation Research Proposal. Completion of the Ph.D. degree requires the writing and defense of the Dissertation and the writing of a business commercialization plan and/or publication of the research findings.

Curriculum

´¡ÌýminimumÌý´Ç´ÚÌý90 semester credit hoursÌýof approved graduate coursework are required beyond the B.S. degree. For students directly admitted into the Ph.D. program with a B.S. degree, the minimum coursework requirements specified below must be satisfied.

  • Register and attend a weekly seminar series in the College of Engineering or the College of Medicine. Registration and attendance is mandatory every semester.
  • Complete 13 hours of core coursework.
  • Complete 12 hours of engineering/life sciences elective coursework.
  • Complete 3-6 hours of entrepreneurship elective coursework.
  • Complete 15 hours of other engineering/science elective coursework.
  • Complete at least 45 semester hours of dissertation research. A student can register for dissertation research only after passing theÌýQualifying ExamÌýand defending theÌýDissertation Research Proposal.

The PhD curriculum requirements are designed to allow students maximum flexibility in selecting coursework appropriate for the research area. The curriculum for the PhD in Biomedical Engineering centers on several core course requirements in mathematics, engineering, and the life sciences. Additional technical courses are taken as needed to support the research area. A listing of approved elective courses is available here. In addition to the technical content, the PhD curriculum also contains a very unique entrepreneurship component. Students take two courses from the College of Business on intellectual property and research commercialization, and develop a business plan to commercialize their dissertation research. Individual course selections are made by the student and the student's research advisor and/or dissertation committee. The detailed curricular requirements are summarized in Table 1.

Table 1: Curriculum for the Ph.D. in Biomedical Engineering.ÌýCoursework requirements listed are for students entering with a B.S. degree.

Course Number and Title Hours
ÌýCore Courses Ìý
ÌýBIOE 8100 Computational Physiology 3
Ìý7/8XXX Prerequisite for mathematics course 3
ÌýINDI 8020 On Being a Scientist 1
ÌýÌýÌýÌýÌýÌýChoice ofÌýoneÌýof the following mathematics courses:
ÌýMIME 8100 Advanced Engineering Mathematics II 3 3
ÌýMATH 8510 Partial Differential Equations 3
ÌýÌýÌýÌýÌýÌýChoice ofÌý3+Ìýcredit hours of graduate level courses from the College of Medicine; example courses are listed below.Ìý
ÌýÌýÌýÌýÌýÌýStudents emphasizing the biological sciences must complete at leastÌý
ÌýÌýÌýÌýÌýÌý5 credit hours of BMSP courses:
ÌýBMSP 6330 CP&RA* in Protein Structure and Function 2.5 3+
ÌýBMSP 6340 CP&RA* in Genes and Genomes 2.5
ÌýBMSP 6350 CP&RA* in Cell Biology and Signaling 3
ÌýBMSP 6360 CP&RA* in Biomembranes 3
ÌýORTH 5900 Orthopaedic Biomechanics I orÌýequivalent 3+
ÌýMPHY 8040 Diagnostic Radiological Physics orÌýequivalent 3+
Total Core Course HoursÌýÌý 13+
ÌýApproved Elective Courses Ìý
Ìý7/8XXX Approved Engineering/Life Sciences Electives 12
ÌýEntrepreneurship Elective Courses Ìý
ÌýEFSB 6590 New Venture Creation 3
ÌýEFSB 6690 Technology Commercialization 3
Total Business Course HoursÌýÌý 3+
ÌýOther Elective Courses Ìý
Ìý7/8XXX Engineering/Science or Special Topics/Independent Study 15
Ìý e.g. INDI 8000, BIOE 7990, ... Ìý
Total Course HoursÌýÌý 43+
* CP&RA is Current Problems & Research Approaches.

A sample curriculum for the Ph.D. degree is given in Table 2. Elective coursework as well as total dissertation hours will vary for each student.

Table 2: Sample schedule for PhD students in Biomedical Engineering.ÌýA minimum of 90 semester hours are required, including a minimum of 45** hours of dissertation research and a minimum of 45 hours of coursework.

Courses Semester Category
Fall Spring Summer
ÌýYear 1
ÌýÌýÌýPrerequisite mathematics course 3 Ìý Ìý Core
ÌýÌýÌýMIME 8100 or MATH 8510 Ìý 3 Ìý Core
ÌýÌýÌýINDI 8020 On Being a Scientist Ìý Ìý Ìý1 Core
ÌýÌýÌýBIOE 8100 Computational Physiology Ìý 3 Ìý Core
ÌýÌýÌýCollege of Medicine core course 3+ Ìý Ìý Core
ÌýÌýÌýApproved ENG/Life Science Electives 3 3 Ìý Approved Elect.
ÌýÌýÌýBME Dissertation Research Ìý Ìý Ìý Research
ÌýÌýÌýBiomedical Engineering Seminar* X X Ìý Ìý
ÌýÌýÌýQualifying Examination Ìý Ìý X Ìý
Total Year 1ÌýÌýÌýÌý 9 9 1 19
ÌýYear 2
ÌýÌýÌýApproved ENG/Life Science Electives 3 Ìý Ìý Approved Elect.
ÌýÌýÌýOther Engineering/Science Electives 3 6 Ìý Other Elect.
ÌýÌýÌýBME Dissertation Research 3 3 1 Research
ÌýÌýÌýBiomedical Engineering Seminar* X X Ìý Ìý
ÌýÌýÌýDissertation Research Proposal Exam Ìý Ìý X Ìý
Total Year 2ÌýÌýÌýÌý 9 9 1 19
ÌýYear 3 and beyond
ÌýÌýÌýApproved ENG/Life Science Electives 3 Ìý Ìý Approved Elect.
ÌýÌýÌýEntrepreneurship Electives Ìý 3 Ìý Entrepr. Elect.
ÌýÌýÌýOther Engineering/Science Electives 3 3 Ìý Other Elect.
ÌýÌýÌýBME Dissertation Research 3 3 1 Research
ÌýÌýÌýBiomedical Engineering Seminar* X X Ìý Ìý
Total Year 3 and beyondÌýÌýÌýÌý 9 9 1 19+**
Total ProgramÌýÌýÌýÌý Ìý Ìý Ìý 90+**

* Seminar is typically a no credit course offered Fall and Spring semesters.

** Research hours to finish degree taken in Years 4 & 5 assuming entering degree is at the BS-level (MS-level students may be able to transfer in some graduate coursework allowing additional research hours to be taken in years 2-3).

Qualifying Examination

The Qualifying Examination is an oral exam used to assess a student's critical thinking skills and understanding of the foundational material essential for success in the doctoral program. For students accepted into the Ph.D. program, the Ph.D. Qualifying Exam will occur after the completion of the required first year coursework.

The students rotate through 3 different examination topics which are mediated by 2-3 faculty members. Each testing topic lasts no more than 25 minutes; each student is asked questions of increasing difficulty until the perimeter of the student's knowledge is determined. Students then have 5 minutes to move on to their next testing topic. All students are tested on the common areas of mathematics and physiology. Each student selects the third test segment from the three broad specialization areas of biomechanics, bioprocessing/molecular & cellular biology, and bioelectrical systems.

To ensure that all students are tested fairly, a single day is scheduled for simultaneous testing of all students. The timing of the exam is during the week following Spring semester final exams (early May). For any students who fail the exam, the qualifier may be retaken one time. The timing for the retesting is at the end of July. However, under extenuating circumstances, the testing committee may recommend remedial coursework and/or extend the time for retesting to up to one year from the original qualifying examination.

After each student is orally questioned, the faculty exam team determines whether the student's foundational knowledge in the area is acceptable (pass), marginal, or unacceptable (fail). Following testing of all students, the exam teams assemble to consolidate and finalize the overall examination outcome for each student. The criterion for passing and retesting is shown below:

Topic scores Exam outcome
2 or more passes, no fails ÌýÌýPass
2 or more marginals, no fails ÌýÌýRetesting options determined by exam committee
1 fail ÌýÌýRetest failed section
2 or more fails ÌýÌýRetest entire exam

Decisions for passing and retesting are decided by a consensus decision of the testing faculty with the student's faculty advisor abstaining from the discussion, if present. In addition to deciding the examination outcome, the examination committee may recommend additional coursework for students as appropriate.

Following the finalization of the examination outcomes, the Program Director immediately notifies the students tested in writing of the testing outcome. If retesting is required, the student is also informed of the date of testing and the topic(s) to be retested. Students who do not receive an outright pass on the first examination have one opportunity to retest with a passing score or are dismissed from the program.

Ph.D. Dissertation Committee

Following the successful completion of the Qualifying Examination, students are expected to form their dissertation committees with the advice and consent of their research advisors. Each committee must consist of at least five UT Graduate Faculty. Affliated Faculty must constitute the majority on each committee. Each committee must include at least one Affiliated Faculty member from COE, one from COM, and one external faculty member usually from COBA.

Doctoral Candidacy and GRAD Form

All doctoral students must meet the following requirements before being admitted to doctoral candidacy:

  • Pass the Biomedical Engineering Qualifying Examination
  • Select a dissertation committee
  • Obtain at least a 3.0/4.0 for all graduate level coursework

TheÌýPh.D. candidacy formÌýmust be completed and submitted to the College of Engineering Office of Graduate Studies.

Prior to initiating dissertation research, each student must complete and file aÌýGRAD FormÌýwith the College of Graduate Studies. Students must complete this form and receive the required approvals prior to beginning any research for a thesis involving humans, animals, radiation, or biohazardous substances. Federal regulations do not allow retroactive approval. Completion of the GRAD form indicates that a student's committee has approved both a topic and an approach for the research, and is aware of federal requirements for institutional review of research methods. This form must be signed by the student, research advisor, and thesis committee members.

Dissertation Research Proposal Examination

The dissertation research proposal is a document written by the student describing the research to be undertaken for the dissertation.ÌýThe oral examination consists of the presentation of the written proposal by the student to the dissertation committee in a closed forum. The dissertation research proposal must be written and presented within one calendar year of passing the Qualifying Examination. A student may request an extension of up to one additional calendar year with the approval of the faculty advisor.

The dissertation research proposal should describe the background, goals, hypotheses, and general methods of the proposed research. The proposal itself should be a clear demonstration of the student's ability to write and formulate an original research problem. The proposal should be structured in a manner similar to an NIH grant application and must contain the following components:

  • Table of Contents
  • Abstract
  • Research Plan
    1. Specific Aims
    2. Background and Significance
    3. Preliminary Studies
    4. Research Design and Methods
  • Literature Cited

The entire proposal should be double spaced using aÌý12-pointÌýfont withÌýone inchpage margins. TheÌýabstractÌýis limited to one page, single-spaced. The research plan (items A-D) should not exceedÌý25 pagesÌýin length. The written research proposal must first be submitted to the faculty advisor for critical review. The Ph.D. proposal should be of high quality such that the faculty advisor could submit the final proposal to a funding agency in the same or modified form.

After the advisor's approval, copies of the proposal must be given to all members of the dissertation committee at leastÌýtwo weeksÌýbefore the oral presentation. The dissertation proposal must then be formally presented to the dissertation committee and defended to their satisfaction. The presentation should be no more than 30 minutes, followed by questions to address specific issues related to the proposed research. The dissertation committee will evaluate the dissertation research proposal based on the appropriateness of the proposed research and the student's ability to complete it successfully. A vote of approval on the research proposal, possibly subject to requested modifications by the committee, indicates that the committee endorses the suitability of the proposed research and the student's ability to complete it successfully. An electronic copy of the final, approved proposal should be given to the faculty advisor. The student must submit a hard copy of the final version of the proposal, with the signed PhD Dissertation Proposal Approval form to the COE Graduate Studies secretary to be retained in the student's file.

A student who fails the dissertation research proposal examination may petition the BME Program Advisory Committee to retake the exam during the following semester. However, approval of the petition for an opportunity to retake the exam is not guaranteed.

Entrepreneurship component

The PhD in Biomedical Engineering includes an entrepreneurial component which is nurtured through close interaction with the College of Business Administration. COBA houses the UT Center for Technological Entrepreneurship and Innovation. The purpose of this Center is to assist entrepreneurs in commercializing their discoveries and establishing and growing a business. Each student in this degree program completes the course EFSB 6590 New Venture Creation as part of the approved elective coursework. Students may also elect to complete the additional graduate level COBA course EFSB 6690 Technology Commercialization.

Each student then integrates his COBA coursework with his research discoveries and submits a formal business plan to commercialize his dissertation research. This plan must be presented and approved by the dissertation committee prior to the final approval of the dissertation. The committee, which includes one faculty member from the COBA, may seek the advice of others in evaluating the submitted plan.

In recognition of the fact that some students will focus on more fundamental scientific research which may have limited commercial value, a student may request from the dissertation committee a substitution of the business plan by a research equivalent of this requirement. An example of such an equivalent requirement would be evidence of submission and/or publication of two peer-reviewed journal articles.

Doctoral Program Proposal Form

All Ph.D. students must file a UTÌýDoctoral Program Proposal formÌýwith the College of Graduate Studies following successful completion of the Dissertation Research Proposal Examination. The College of Engineering has an electronic version specific to engineering students posted on the College of Engineering web site; this is not the same as the general form posted at the College of Graduate Studies.

A student's Doctoral Program Proposal form should be completed in consultation with the faculty advisor and/or the Program Director. The Doctoral Program Proposal must beÌýTYPEDÌýand includeÌýONLYÌýthose courses that count toward the 90 hours required for the degree, even if additional coursework hours are completed (Note: if a MS degree was previously completed, certain approved courses might be able to count toward the 90 hours). Students are responsible for selecting approved courses that satisfy the curriculum requirements as outlined in Table 1. Any questions regarding whether courses will satisfy the degree requirements should be addressed to the Program Director. Future courses should be entered with the expected term to be taken and no grade entered. Doctoral Program Proposal forms should be saved electronically in case modifications are required. Completed proposals should be submitted to the College of Engineering Office of Graduate Studies for approval. Modifications to an approved Doctoral Program Proposal must be submitted on a revised proposal form.

Dissertation Committee Meetings

After the student completes the PhD Dissertation Research Proposal exam, yearly committee meetings with the dissertation committee are strongly encouraged. These meetings serve several functions, primarily to: (1) keep the committee up-to-date on the student's research progress, (2) serve as a mechanism to keep the research focused, (3) provide feedback to the student as to the rate and quality of progress toward the degree, and (4) provide a forum for the student to solicit advise and guidance in areas of difficulty. For each committee meeting, the student should plan a formal presentation that restates the goals of the dissertation research, explains the steps undertaken to meet these goals, summarizes the research findings since the last committee meeting, and presents the research plan for the coming year. In addition, any manuscripts or publications completed since the last committee meeting should be distributed to the committee.

When the dissertation research is nearly completed, a final committee meeting, or Data Meeting, may be scheduled. The purpose of the Data Meeting is for the student to summarize for the committee the accomplishments of the dissertation research, including the most recent results and the final experiments to be conducted. If all committee members are satisfied with the quality and quantity of the research presented at this Data Meeting, the student is given final recommendations and is given approval to begin writing the dissertation.

Ph.D. Dissertation and Defense

Dissertation research is to be conducted in residence. The research must be completed, and the dissertation written and successfully defended before the Ph.D. degree is conferred. The primary requirement of the dissertation is that it shows evidence of high scholarly attainment through original and independent research work. The acceptability of a dissertation research depends on its quality, as is evidenced by the potential of the developed business plan and/or publication(s) in peer-reviewed journals, rather than the time and credit hours spent on the research work. Publication of research findings in high quality journals is the metric by with our Ph.D. program is measured and is highly recommended for completion of the Ph.D. degree.

When the dissertation research is completed to the satisfaction of the faculty advisor, the student prepares a complete draft of the Ph.D. dissertation. This draft is submitted to the faculty advisor for critical review, evaluation, and revision before scheduling the final defense of the dissertation. The student should give the advisor sufficient time to review the draft. After the advisor approves the document, the student prepares the final draft of the dissertation and submits a copy to each committee member for his or her critical evaluation and review at leastÌýtwo (2) weeksÌýprior to the defense. The dissertation document itself can be a compilation of publications combined with appropriate introductory and concluding chapters. Information concerning the required dissertation format, reproduction, and other regulations for preparing the dissertation is available from the UT College of Graduate Studies.

The defense is scheduled after the candidate has fulfilled all of the other requirements of the doctoral program. The student must coordinate with all of the dissertation committee members in scheduling a date and time for the dissertation defense. TheÌýminimum number and affiliationÌýof the dissertation committee members that must be present at the defense is as defined in the Ph.D. Dissertation Committee section above. Scheduling and reserving a room (i.e. a department conference room) is also the responsibility of the student.

The dissertation defense is an open and announced public presentation by the student.ÌýAnnouncement of the dissertation defense is a formal procedure and is a requirement for the defense.ÌýA BME Announcement of Ph.D. Dissertation form should be completed and submitted to the College of Engineering Graduate Studies officeÌýat least two (2) weeksÌýbefore the scheduled defense. In a situation where intellectual property disclosure is an issue, the dissertation defense can be closed to the public by request of the faculty advisor. The Announcement of Dissertation form is still filed, but with the notation that the defense is closed to the public.

The student's dissertation committee and all those attending the meeting administer the examination. The examination is restricted to the content of the dissertation and closely related subject matter. The student must bring the completed Ph.D. Dissertation Defense Approval form to the defense to be signed by the committee members following a successful defense. The dissertation defense itself consists of aÌý45 minuteÌýformal oral presentation by the student, followed by open and closed question sessions. In the open question session, all guests attending the defense are invited to ask questions. Following the open question period, all guests will be asked to leave and the committee and student will remain for a private question period. After all of the committee members have questioned the student in private, the student will be asked to leave the room while the committee discusses the student's dissertation in private. The dissertation committee then votes, and a majority of the committee must concur on the final decision. If the student does not pass the dissertation defense, then the dissertation committee, in consultation with the Program Director, will decide a course of future action.

A student who successfully passes the dissertation defense may be required to change or modify the dissertation as requested by members of the dissertation committee and the advisor. These corrections must be made by the student and approved by the faculty advisor before the student is certified as having completed the requirements for the dissertation. In this case, the committee members may sign the Ph.D. Dissertation Defense Approval form on the contingency that the faculty advisor certifies the final dissertation before signing the approval. AnÌýunbound original and a copyÌýof the final dissertation must be submitted to the College of Graduate Studies. The student must check with the College of Graduate Studies to ensure that the corrected dissertation is received by the graduation deadline for the semester of the defense. In addition,Ìýtwo copiesÌýof the dissertation must beÌýpermanently boundÌýand given to the COE Graduate Studies office (one for the advisor and one for the College library). Students are responsible for the costs associated with the copying and binding of the dissertation.

Time Limit

Doctoral candidacy automatically terminatesÌýfive (5)Ìýyears after admission to candidacy. All requirements for the doctoral degree must be completed withÌýseven (7)Ìýyears of admission to the Ph.D. program (registration for first doctoral level class). To continue beyond the time limit, a written request for extension to the research advisor and the Dean of the College of Engineering must be submitted and approved.

Ph.D. Forms Check Sheet

Over the course of the Ph.D. dissertation, several milestones must be achieved. These milestones are typically documented with a specific University or Program form. The specific milestones, forms, and the times for submission of these forms are summarized in Table 3 below.

Table 3: Ph.D. Forms Check Sheet.ÌýThe forms listed below must be completed and filed by the appropriate due dates as part of the Ph.D. degree requirements. All forms are available in electronic form on the Department, College and/or Graduate Studies websites.

Form Due date Return to
BME Advisor Selection End of 1st semester of enrollment BME Program Director
UT Doctoral Program Proposal Form Begin upon completion of Qualifying Examination; submit following completion of Dissertation Proposal Examination CoE Graduate Office
UT PhD Candidacy Form Upon completion of Qualifying Exam and selection of Dissertation Committee CoE Graduate Office
GRAD Form After advisor selection, prior to initiation of research involving humans, animals, radiation, or biohazardous materials CoE Graduate Office
Ph.D. Dissertation Proposal Approval Within 1 year from Ph.D. Qualifying Exam CoE Graduate Office
UT Application for Graduation Beginning of final semester; check theÌýRegistrar's websiteÌýfor specific dates College of Graduate Studies
Announcement of Thesis/Dissertation At least two weeks prior to thesis defense CoE Graduate Office
Business Plan Submission and Evaluation form Following completion of COBA elective courses, prior to completion of the dissertation CoE Graduate Office
College of Engineering PhD Dissertation Cover Page Attach to front of completed dissertation
Ph.D. Dissertation Defense Approval Bring to the dissertation defense CoE Graduate Office
BME Graduate Exit Interview Form Upon completion of dissertation degree requirements CoE Graduate Office

Ph.D. Graduation

Students must apply for graduation using theÌýUT Application for GraduationÌýform. This form must be filed with the Student Records Office at or before the beginning of the semester during which the degree requirements are expected to complete.

To receive the Ph.D. degree, a student must:

  • Satisfy the coursework requirements summarized in Table 1.
  • Maintain aÌý3.0/4.0 GPAÌýin all coursework (see Grade Requirements for Graduation).
  • Pass the Qualifying Examination.
  • Pass the Dissertation Research Proposal Examination.
  • Complete and receive approval of the business plan for commercialization of the dissertation research and/or provide evidence of publication of two or more peer-reviewed journal publications.
  • Submit all appropriate degree forms according to Table 3.
  • Write and successfully defend the doctoral dissertation and make any corrections as required.
  • Submit theÌýunbound originalÌýandÌýone copyÌýof the Ph.D. dissertation to the College of Graduate Studies by the graduation deadline for the semester of the defense. Each copy of the dissertation must include anÌýoriginal signedÌýCollege of Engineering Ph.D. dissertation cover page.
  • Have allÌýPRÌýandÌýINÌýgrades removed from the transcript. The College of Engineering Graduate Office must see a copy of the final dissertation before grade change forms will be processed. A copy of the College of Graduate Studies cover page, COE cover page and abstract will be made for the College files to verify that the dissertation has been completed.
  • Submit an electronic copy of the dissertation the faculty advisor.
  • SubmitÌýtwo permanently boundÌýcopies of the Ph.D. dissertation to the COE Graduate Studies office: one for the College library and one for the research advisor.

Additional Graduation Requirements

Individual faculty advisors may have additional coursework, conference presentation, or publication requirements that must be satisfied before the degree is granted. These requirements should be discussed and agreed upon with the faculty advisor at the beginning of the Ph.D. program of study. Written documentation of any additional graduation requirements must be signed by both student and advisor and filed in the student's file in the College of Engineering.

Graduate Program Navigation Menus:
Bioengineering Home
Schedules:Ìý
Course SchedulesÌý/ÌýElective SchedulesÌý/ÌýSeminar SchedulesÌý/ÌýNews & EventsÌý
Facilities:ÌýÌý
ECORE and NSFI/UCRCÌý/ÌýCMSC
Prospective Students:
Admission RequirementsÌý/ÌýProvisional AdmissionÌý/ÌýApplication InformationÌý/ÌýFinancial AssistanceÌý/ÌýTransfer Credit
MS Programs:ÌýÌý
BSMS Early Admission ProgramÌý/ÌýMSBE ThesisÌý/ÌýMSBE Coursework
PhD Programs:Ìý
PhD in EngineeringÌý/ÌýPhD in Biomedical Engineering
Current Graduate Students:ÌýÌý
AdvisingÌý/ÌýRegistrationÌý/ÌýResidencyÌý/ÌýGrade RequirementsÌý/ÌýDegree Time Limits
Graduate Student Forms:ÌýÌý
Advisor SelectionÌý/ÌýDefense AnnouncementÌý/ÌýPhD Qualifying ExamÌý/ÌýPhD Dissertation ProposalÌý/ÌýMS Thesis DefenseÌý/Ìý
PhD Dissertation DefenseÌý/ÌýExit Interview